Anasayfa > Ürünler > Eksenel Akış Pompaları > Alkali Endüstrisi için Pompalar > Kimya endüstrileri için asit ve alkali dirençli pompa

Tedarikçi başvurun

Ms. Ivy

Mesaj bırakın

Şimdi başvurun

Beğenebilirsin

Yüksek Kaliteli Yatay Eksenel Akış Dirsek Pompası Şimdi başvurun

Flowserve Eksenel Akış Pompası Şimdi başvurun

HZ serisi uç emme tek kademeli santrifüj pompa Şimdi başvurun

Kostik Soda Fabrikası için Nikel Pompası Şimdi başvurun

Reaksiyon Tankı için DJ Alt Girişli Karıştırıcı / Karıştırıcı Şimdi başvurun

Kimya endüstrileri için asit ve alkali dirençli pompa Şimdi başvurun

Dikey Bulamaç DJ Pervanesi Şimdi başvurun

DJ Pervane ve Pompa Karıştırıcı Şimdi başvurun

 

Kimya endüstrileri için asit ve alkali dirençli pompa

$2000

≥1
Set/Sets

Ödeme şekli:

L/C,T/T

Incoterm:

FOB,CFR,CIF,EXW

Min. sipariş:

1 Set/Sets

Ulaşım:

Ocean,Land,Air

Liman:

Shanghai,Guangxi,Chengdu

Şimdi başvurun

Ürün Açıklaması

Ürün özellikleri
Tedarik Yeteneği ve Ek Bilgiler
Paketleme ve Teslimat

< >

Overview

Ürün özellikleri

model numarası.: HZ65-50-125

Marka: Gaofeng

Impeller Number: Single-Stage Pump

Working Pressure: Middle Pressure Pump

Influent Type Of Impeller: Single Suction Pump

Position Of Pump Shaft: Horizontal Pump

Pump Casing Combined: Radial Split Casing

Mounting Height: Suction Centrifugal

Impeller: Open

Usage: Pump

Position Of Pump Shaft: Horizontal Pump

Materials: SS304, SS316, SS316L, Titanium, Monel, 2205, CD4MCU

Tedarik Yeteneği ve Ek Bilgiler

Ambalaj: Tahta sandık veya çerçeve çelik kasa

Verimlilik: 1100000 sets/year

Ulaşım: Ocean,Land,Air

Menşe yeri: Zigong, Sichuan, Çin

Desteklemek: 110000 sets/month

Sertifika: ISO9001

HS Kodu: 8413709990

Liman: Shanghai,Guangxi,Chengdu

Ödeme şekli: L/C,T/T

Incoterm: FOB,CFR,CIF,EXW

Paketleme ve Teslimat

Satış Birimleri:: Set/Sets

Paket Türü:: Tahta sandık veya çerçeve çelik kasa

Acid & Alkali Resistant Pump for Chemical Industries/Alkali Industrial Pump/Alkali Centrifugal Pump/Horizontal Alkali Process Pump

Brief introduction:

HZ series chemical process pump including ZBG(closed impeller type), ZBK(semi-open impeller type) and ZBQ(fully-open impeller type). It is an elaborately developed chemical process pump of new generation which absorbed the advanced technology of both home and aboard,and eliminated the technical defects of IH and CZ chemical process pump,with the advantages of better anti-cavitation performance, stable sealing performance, smooth operation and easy maintenance. The high interchangeability,transforming structures and various anti-corrosive materials satisfy the requirements of different applications,and therefore is widely used.

Parameters:

Flow rate:	Q= 2~2050 (m³/h)
Total head:	H=3~150 (m)
Pump speed:	n=1450/2900rpm
Design temperature:	T=-20~150ºC
Fluid s.g.:	γ≤1.85
Pump diameter:	50~350mm

Özellikler:

Conform to ISO2858(GB5662)and GB/T5656(equivalent to ISO5199)
Heavy shaft of increased diameter, the bearing capacity of bearings is averagely increased by 75~160%, the life of bearings are tremendously extended.
Forced internal cooling cartridge mechanical seal and big sealing chamber reduced the possibility of breakdown.
Easy adjust method of pump rotor part to maintain low pressure of sealing chamber, to reduce the axial force,and therefore guaranteed the stable operation of pump.
Several transforming designs enlarged the range of application of pump, increased the reliability of pumping special fluids.
High interchangeability of pump parts reduced the cost on spares parts for clients.

Yapı:

Single stage,single suction,horizontal centrifugal pump. Bracket structure for bearing parts, the bearing housing is supported by the bracket. The axial displacement of pump rotor part can be adjusted by a special bolt. Closed impeller(ZBG type),semi-open impeller(ZBK type) and fully opened impeller(ZBQ type) are available.
The impeller is connected with shaft by screw thread, an anti-vortex plate is adopted at the pump inlet to increase the reliability of pump.
The impeller with rear blades is adopted to balance the axial force at the pump suction. And the gap between the rear blades of impeller and pump cover can be adjusted by a bolt.
The pump structure is back pull type,the rotor part(impeller,shaft,shaft sealing and bearings) can be removed without dismantling the pipes during maintenance.
The shaft sealing is cartridge mechanical seal, and can be customized as single mechanical seal, packing sealing and secondary impeller+packing sealing.

Configuration:
Alkali Industrial Pump

Başvuru:

ZB series chemical process pump is suitable to pump clean fluids, fluids with small quantity of small particles and corrosive fluids. The fluids including: inorganic acid,organic acid, petrochemical fluids,organic compounds and other corrosive fluids. The ZB series pump is mainly applicable for:

Refinery,petrochemical industries,coal mine process industry and low temperature projects.
Chemical industry,paper-making,paper pulp industry,sugar industry.
Water treatment plant, seawater desalination projects
Enerji santrali
Environment protection projects
Vessel and offshore industries.

Ürün kategorileri : Eksenel Akış Pompaları > Alkali Endüstrisi için Pompalar

Anasayfa > Ürünler > Eksenel Akış Pompaları > Alkali Endüstrisi için Pompalar > Kimya endüstrileri için asit ve alkali dirençli pompa

Sıcak Ürünler

Bu tedarikçi için e-posta

*Konu:
*için:

Ms. Ivy
*E-posta:
*İleti:

Mesaj 20-8000 karakter arasında olmalıdır